Out of the Tumbler

Beach Cobbles, San Simeon, CA

As I posted back in March, I spent a pretty mind-blowing day collecting on the beaches near San Simeon, California, on my way up the coast. Why was it so great?  Because nearly every rock on the beaches there is of something interesting, whether a brecciated jasper, or an interesting agate, or some things that I don't even know the names for. But whatever they are, they have loads of color and striking patterns and polish beautifully in the tumbler.

They do especially well in the tumbler since they are already well-rounded by the wave action. In fact, I usually skip the first coarse grit step in the polishing process and go directly to the finer 120/220 silicon carbide.

I'm still processing rocks I found months ago, and by the time I'm done, it'll be time to head South again to find some more!

Area 54

Misc. Jasper & Agate, Area 54

Some rockhounding locations are in the guidebooks. Others are not, either by the author's choice, or because they are new locations, found just as others are exhausted by hundreds - if not thousands - of collectors.  This place was not one I'd ever read about, except on a rockhounding club website. I don't know where it got it's name - Area 54 - but it does give the place a sense of mystery: it sounds like there should be aliens or UFO's around.  All I can say is, I didn't see any...

The truth is, I don't know exactly where Area 54 is, or at least where the club trips go. It is somewhere on the road into the Panoche Hills in Fresno County, California. I never found the exact spot they described, but it doesn't matter. You can look anywhere in a 5 mile radius, or anywhere along that road and you will find colorful, sometimes stunning, material. The pieces I've posted here just came out of the tumbler - but I have much more.

My advice?  Next time you're driving south on I-5 in central California, take a short detour and explore this canyon.  You won't be sorry!

FOLLOW-UP NOTE: June 15.  I've finally gotten these stones all the way through the polishing process, and sadly, they don't polish well. Most have a largely matte finish with only a few seams that took a good polish. I might have worried that I had done something wrong in the process (such as contaminating the batch with heavy grit somehow) but there were a few agates from elsewhere in the batch and they took a perfect polish - so I know it's the stones. So if they are jasper, they are a somewhat softer one.